User Manual
Configuring Your Wireless Network
22
N450 WiFi Cable Modem Router Model N450/CG3000Dv2
The following screen displays:
5. Click the Next button.
The following screen displays:
6. Either click the WPS button on the screen, or press the WPS button on the front of
the modem router.
The following occurs:
• The WPS LED on the front of the modem router begins to blink.
• The modem router tries to communicate with the wireless computer or device for two
minutes.
• If the security option in the Wireless Settings screen was set to Disable, it is
automatically changed to WP
A-PSK [TKIP] + WPA2-PSK [AES], including a random
wireless security password.
7. Go to the computer or mobile device, and run its WPS configuration utility.
8. T
o click the WPS button, follow the utility’s instructions.
When the computer or mobile device connects to the wireless network, the modem router
sends its SSID and WP
A-PSK or WPA2-PSK configuration to that computer.
9. On the computer that just joined the wireless network, make sure that you can connect to
the Internet.