User's Manual

Advanced Settings
93
N600 Wireless Dual Band Router WNDR3400v3
On the Advanced tab, select Advanced Setup > Dynamic DNS to display the following
screen:
To set up Dynamic DNS:
1. Register for an account with one of the Dynamic DNS service providers whose URLs
a
ppear in the Service Provider list.
2. Select the Use a Dyn
amic DNS Service check box.
3. Select the
URL of your Dynamic DNS service provider. For example, for DynDNS.org,
select www.dyndns.org.
4. Type the host name (or domain name) that your Dynamic DNS service provider gave you.
5. Type the user name for your Dynamic DNS account. This is the name that you use to log in
to your account,
not your host name.
6. Type the password (or key) for your Dynamic DNS account.
7. Click Appl
y to save your configuration.
Static Routes
Static routes provide additional routing information to your router. Under usual
circumstances, the router has adequate routing information after it has been configured for
Internet access, and you do not need to configure additional static routes. You have to
configure static routes only for unusual cases such as multiple routers or multiple IP subnets
located on your network.
As an example of when a static route is needed, consider the following case:
Your primary Internet access is through a cable modem to an ISP.
You have an ISDN router on your home network for connecting to the company where
you a
re employed. This router’s address on your LAN is 192.168.1.100.
Your company’s network address is 134.177.0.0.