User's Manual

Advanced Settings

N600 Wireless Dual Band Router WNDR3400v3

This value represents the number of routers between your network and the destination.

Usually, a setting of 2 or 3 works, but if this is a direct connection, set it to 1.

9. Click App

y to add the static route.

Remote Management

The remote management feature lets you upgrade or check the status of your N600 Wireless

Dual Band Router over the Internet.

 To set up remote management:

1. Select Advanced > Adva

nced Setup > Remote Management.

Note: Be sure to change the router’s default login password to a secure

password. The ideal password should contain no dictionary words from any

language and contain uppercase and lowercase letters, numbers, and

symbols. It can be up to 30 characters.

2. Select th

e T

urn Remote Management On check box.

3. Under Allo

w Remote Access By, specify the external IP addresses allowed to access the

router’s remote management.

Note: For enhanced security, restrict access to as few external IP addresses

as p

ractical.

• To allow access from a single IP address on the Internet, select Only Th

is Computer.

Enter the IP address that allows access.

• To allow access from a range of IP addresses on the Internet, select IP Address

Range. Enter a

beginning and ending IP address to define the allowed range.

• To allow access from any IP address on the Internet, select Ev

eryone.