Reference Manual

NOTE:
When you create users that are meant to
connect via Captive Portal, be sure that your
user has the option to “Store password using
reversible encryption” is ticked on. Otherwise
it will fail to authenticate.
WFS709TP Configuration
To enable Captive Portal as the security method for the Public VLAN, go to Configuration > Basic
and WLAN:
In there, we will select the SSID
that we wish to have under
Captive Portal security (Public, in
our case) and select the option of
Captive Portal under advanced
Authentication.
For authentication we will use
RADIUS.
Click on Add under
“Authentication Server”, and Add
again under “Choose an
Authentication Server”
There we will input our RADIUS
Server and Client settings.
There are additional settings to configure in the Configuration > Advanced > Security >
Authentication Methods > Captive Portal > Authentication page: