Quick Start Manual

ManualsBrandsNetgear ManualsModemsNetgear WNDR37AVv1

Step 2:

Cable your router.

Step 3:

Cable your computer.

Step 6:

Insert Your CD.

Click Router Setup and follow

the steps to set up a secure

wireless network.

Step 5:

Power On Your Router.

Wait until the power LED

turns solid green.

Step 4:

Power On Your Modem.

Wait until your modem cycles on

(approximately 2 minutes).

Wireless-N Router

Modem

(not included)

Laptop or Desktop

Computer

Wireless-N Router

Resource CD

Package Contents:

N600 Wireless Dual Band Gigabit Router

WNDR37AV

Installation Guide

Power AdapterEthernet Cable

Power on/off

Note: If your laptop does not have a

CD drive, see “No CD Drive” Installation

on the back to complete your router setup.

Note: If you have a modem with a battery-backup,

remove and re-insert the battery before connecting

your modem to power.

N600 Wireless Dual Band Router

WNDR37AV

Internet

DSL

or Cable

Step 1B:

Cable your modem.

Step 1A:

Unplug or power off your modem.

N600 Wireless Dual Band Router

WNDR37AV

Resource CD

Summary of content (2 pages)

PAGE 1
Installation Guide N600 Wireless Dual Band Gigabit Router WNDR37AV Step 1A: Unplug or power off your modem. Step 1B: Step 2: Step 3: Cable your router. Cable your computer. Cable your modem.
PAGE 2
“No CD Drive” Installation Set up Internet access 1. In the address field of your browser, type http://www.routerlogin.net and click Enter. Set up wireless security Connect Wireless Devices to Your Router You should set up a secure wireless network. Once your router security is established, your wireless laptops, gaming devices (such as Wii or Play station 3 with wireless), or other wireless equipment can safely and securely connect to the Internet. Enter your wireless information here: 1.