Network Router User Manual
Table Of Contents
- Contents
- Introduction
- Making the Physical Connections
- Connecting to Your Local Area Network
- Configuring TCP/IP
- Console-Based Management
- WAN and System Configuration
- Monitoring Tools
- Security
- Utilities and Diagnostics
- Troubleshooting
- Binary Conversion Table
- Further Reading
- Technical Specifications and Safety Information
- Glossary
- Index
- Limited Warranty and Limitation of Remedies
Making the Physical Connections 2-19
Data is transmitted or received on the WAN on Channel 2 5 or 11 flashes yellow. (D3232 only)
Console cable is attached and has carrier 6 and 7 are green.
Data is transmitted or received 6 and 7 flash yellow.
Data is transmitted or received by the ethernet controller 12 flashes yellow.
The Ethernet interface detects a collision 13 flashes red.
Link is detected 14 though 21 are solid green.
Data are received on their respective ports 14 though 21 flash green.
Note: Console carrier (6) is ignored if the console is not configured for a remote modem.
When this happens... the LEDs...