- Network Electronics Gateway User Manual

ASI-IP-GTW User's Manual
Page 84
8.8 Environmental Conditions
Table 24. Environmental specification
8.9 Compliance
1
8.9.1 Safety
The equipment has been designed and tested to meet the requirements
of the following:
EN60950 European Safety of information technology
equipment including business
equipment.
IEC 60950 International Safety of information technology
equipment including business
equipment.
In addition, the equipment is designed to meet the following:
UL 1950 USA Safety of information technology
equipment including business
equipment.
8.9.2 Electromagnetic Compatibility - EMC
The equipment has been designed and tested to meet the requirements
of the following:
EN 55022 and
AS/NZS 3548
European
Australian and
New Zealand
Emission Standards
Limits and methods of
measurement of radio frequency
interference characteristics of
information technology equipment
– Class A
EN 61000-3-2 European Electronic Compatibility (EMC),
Part 3 Limits, Section 2.
1
The version of the standards shown is that available at the time of
manufacture.
Item Specification
Operational temperature 0˚C to +50˚C
Storage temperature -20˚C to +70˚C
Relative humidity 5% to 95% (non-condensing)
Handling/movement Designed for fixed use when in operation