User manual

Some functional problems might occur for some types of

models when operating outside of that range. The cor-

rect operation can only be guaranteed within the speci-

fied temperature range. If you have any doubts regard-

ing where to install the appliance, please turn to the

vendor, to our customer service or to the nearest Serv-

ice Centre

Electrical Connection

Caution! Any electrical work required to install this

appliance should be carried out by a qualified

electrician or competent person.

Warning! This appliance must be earthed.

The manufacturer declines any liability should

these safety measures not be observed.

Important! The wires in the mains lead are coloured in

accordance with the following code:

Green and Yellow: Earth

Brown: Live

Blue: Neutral

As the colours of the wires in the mains lead of this ap-

pliance may not correspond with the coloured markings

identifying the terminals in your plug, proceed as fol-

lows:

1. Connect the wire coloured green and yellow to the

terminal marked either with the letter “E“ or by the

earth symbol

or coloured green and yellow.

2. Connect the wire coloured blue to the terminal ei-

ther marked with the letter “N“ or coloured black.

3. Connect the wire coloured brown to the terminal ei-

ther marked with the “L“ or coloured red.

4. Check that no cut, or stray strands of wire is

present and the cord clamp

is secure over the

outer sheath.

5. Make sure the electricity supply voltage is the

same as that indicated on the appliance rating

plate.

6. Switch on the appliance.

The appliance is supplied with a 13 amp plug fitted

In the event of having to change the fuse in the plug

supplied, a 13 amp ASTA approved (BS 1362) fuse

must be used.

Warning! A cut off plug inserted into a 13 amp

socket is a serious safety (shock) hazard. Ensure

that it is disposed of safely.