Patch Panels 151
i n n o v a t i v e Content Page NPPA-Series - 96 Bantam (TT) Jacks .......................... Configuration, Grounding, Wiring ............................ NPP-TB-Series - 48 B-Gauge Jacks ............................. Configuration, Grounding, Wiring ............................ 1/4" Patch Panel NYS Series .................................... Configuration, Grounding ........................................ MA 96 and XPM 96 Bantam Patchbays ..................... MAJ 501 Bantam Jack Socket .............
s u p e r i o r q u a l i t y Audio Normalling Audio Normalling is usually used with audio patch panels and is a wiring pattern in which a circuit path is established from one piece of audio equipment to another without the use of a patch cord. This pattern is then considered to be the „normal“ circuit path that is desired most of the time. If a patch cord is inserted, the normal circuit path is interrupted and rerouted to a different circuit path.
N P P A Robust front design Easy assembly S e r i e s Jack-pair N P PA - S e r i e s IDC terminals - Push terminals ELCO connectors 96 Bantam (TT) Jacks NPPA-TT-PT • Innovative and compact patching system (just 1U high) for 19“ rack mounting • Robustly housed in a black coated steel shell • Features 2 x 48 long life gold plated TT size (bantam) Neutrik NJ3TTA double contact point TRS jacks • Available in all common normalling configurations (default Half Normalled Bottom) • Qualified for analog
N P P A S e r i e s Design Criteria All NPPA patch panels are fitted with high quality, long life NJ3TTA gold plated double contact jacks (2x48), featuring best contact integrity. The unit, robustly housed in a black coated steel shell, is finished off with a built in cable bar and two large channel identification strips for perfect management of the system. The NPPA patch panels are an innovative and compact patching system (just 1U high) for 19" rack mounting.
N P P - T B Individual colour coding S e r i e s Galvanized metal housing NPP-TB-Series - 48 B-Gauge Jacks NPP-TB-HN NPP-TB + NPP-LB* • Features 2 x 24 Neutrik® NJ6TB-V long frame 1/4” TRS jacks according to BPO316/MIL-P-642/2 • Very robust and compact galvanized metal housing • Compact, cost effective system qualified for both analog and digital signals acc.
N P P - T B S e r i e s Design Criteria The NPP-TB patch panels are equipped with gold plated, high quality long life NJ6TB-V Jacks for BPO/MIL style plugs. The panels are easily programmable for six switching configurations and offer a flexible grounding system. The NPP-TB patch panels are very robust and compactly designed for 19" rack mount (19" x 1U) with galvanized metal housing and a built-in cable bar on the rear for securing wires. There is a rear extension bar (NPP-S) available as an option.
N Y S Ruggedized metal housing Imprinted grounding instruction S e r i e s Module NYS-SPCR1 1/4" Patch Panel NYS-SPP-L1 • Individual grounding available for each channel separately • Ruggedized metal housing • Improved contact design minimises wear on mated plugs • Economic and versatile designed 1/4" modular patch panel with 2 rows of jack sockets • 48 balanced channels with fully PCB wired jack (24 vertical PC boards), 24 front pairs and corresponding 24 rear pairs • Jack PC card contains 4 balance
N Y S S e r i e s Design Criteria The PCBs are held securely in place by being clamped between the front and the rear panel, this grants an easy reconfiguration of the patch panel without the danger of loosing any small parts (e.g. nuts). The grey jack serves as an easy and distinguishable normalling identification. The NYS-SPP-L1 is a economical and remarkable sleek designed 1/4“ modular patch panel for 19“ rack mount (19“ x 1U) with a reinforced metal housing.
B a n t a m Standard 4.4mm bantam jack P a t c h P a n e l s Long frame jack socket MA 96 and XPM 96 Bantam Patchbays • Robust designed patchbay to accept standard 4.4 mm Bantam jack connectors (acc.
B a n t a m Die-cast frame P a t c h P a n e l s Tinned tags MAJ 501 Bantam Jack Socket • 5-point Bantam jack socket (Tip, Ring, Sleeve, Tip Normal, Ring Normal) • Rigid nickel plated die-cast frame, featuring considerable frame strength eliminating physical distortion when plug is inserted • Nickel-silver spring contacts, palladium plated switch contacts • Tinned tags for easy soldering Termination End Elevations Plan Elevations Circuit Detail www.neutrik.
L o n g f r a m e B-Gauge patchbay B - G a u g e P a t c h 48 way longframe LF 48 B-Gauge Patchbays • 48 way Longframe B-Gauge patchbay • Accepts both European BPO 316 and US MIL-P-642/2 style phono plugs • 2 rows of 24 LF501 jack connectors • Jack designed from rigid nickel-plated die-cast aluminium with nickel-silver spring contacts • Available in 4 colours: black, silver, red or blue • Reliable support for connecting looms by steel lacing bar Dimensional Drawing 162 innovative solutions I superi
L o n g f r a m e B - G a u g e P a t c h P a n e l s Solder lugs LFJ 501 B-Gauge Jack Socket • 5-point B-Gauge jack socket • Nickel-silver spring contacts • Palladium plated switch contacts • Durable die-cast body with bright nickel plated nose • Termination solder lugs LFJ 501 Plan Elevations Circuit Detail www.neutrik.
T e c h n i c a l Spec i fi c ati o n s NPPA Series D a t a NPP-TB Series NYS Series < 10 mΩ < 15 mΩ < 10 mΩ < 10 mΩ MA 96 and XPM 96 LF 48 Series < 24 mΩ < 26 mΩ < 20 mΩ < 15 mΩ 110 mm (4.33") 115 mm (4.
O r d e r i n g Part Number Description N P PA S e r i e s NPPA-TT-PT** NPPA-TT-PT-FN** NPPA-TT-PT-HNT** NPPA-TT-PT-I** NPPA-TT-PT-P** NPPA-TT-S** NPPA-TT-S-FN** NPPA-TT-S-HNT** NPPA-TT-S-I** NPPA-TT-S-P** NPPA-TT-PT-PH NPPA-TT-SD50 NPPA-TT-SD25 NPPA-TT-E56 NPPA-TT48-E56 NPPA-TT-E90 NPPA-TT-IDC I n f o r m a t i o n 2 x 48 jacks 2 x 48 jacks 2 x 48 jacks 2 x 48 jacks 2 x 48 jacks 2 x 48 jacks 2 x 48 jacks 2 x 48 jacks 2 x 48 jacks 2 x 48 jacks 2 x 48 jacks 2 x 48 jacks 2 x 48 jacks 2 x 48 jacks 2 x 24
O r d e r i n g Part Number I n f o r m a t i o n Description MA96 and XPM-96 MA96-1A MA96-1D MA96-1O MA96-1S XPM-96SS XPM-96SO 96 96 96 96 96 96 way, way, way, way, way, way, Red front panel – grouped 12 x 8 Blue front panel – grouped 12 x 8 Black front panel – grouped 12 x 8 Silver front panel – grouped 12 x 8 Silver front panel – grouped 4 x 24 Black front panel – grouped 4 x 24 Bantam Jack Socket MAJ-501 Standard Solder Tag LF48 Longframe B-Gauge Patchbays LF48-1A LF48-1D LF48-1O LF48-1S LFJ-5