Information

www.neutrik.com
5
Neutrik
®
is committed to the preservation of environmental
resources and that our products are developed and manufac-
tured in an environmentally should read acceptable manner
considering health and safety excellence.
We comply with all relevant government laws and directions
which relate to environmental protection. We support with
all means available to us the preservation of natural resources
by economizing the use of materials and by recycling waste.
We develop products and processes which are safe, conserve
energy and make use of materials which are at a minimum
impact on the environment and, where possible, permit recy-
cling.
All production methods are based on environmentally sound
handling and the elimination of hazardous material. Some
time before the amended EU Directive RoHS (Reduction of
Hazardous Substances) came into force on July 1st 2006,
Neutrik
®
already complied with these requirements laid down
therein and stopped using lead in the soldering process at the
end of 2004. In addition Neutrik
®
conforms to the following
EU Directives and regulations:
EU 76/769/EEC
EU 2000/53/EC
EU 2002/95/EC (RoHS)
EU 2002/96/EC (WEEE)
Sony Technical Standard SS-00259 (Sony Green Partner)
Environmental – Compatibility
Quality
For Neutrik
®
, quality is the utmost priority. Uncompromising
selection of designs, materials and subcontractors as well as
manufacturing technologies guarantee the highest level of
quality. Neutrik
®
holds several approvals with manufactur-
ing compliance organizations including UL, cUL, VDE, SEV,
CSA. A sophisticated quality system is in place based on ISO
9001-2000 with full traceability of production runs and the
supply chain.
Customer Service
It is the Neutrik
®
philosophy to be customer-orientated and to
stay in close contact with our customers all over the world,
using an international network of subsidiaries, associated
companies and distributors, Neutrik
®
takes care of consulta-
tion, sales and after-sales-service.