Setup instructions
NEUTRIK AG NEUTRIK Zürich AG NEUTRIK (UK) Ltd. NEUTRIK USA INC. NEUTRIK Tokyo Ltd. NEUTRIK France NEUTRIK Vertriebs GmbH
Liechtenstein Switzerland Great Britain USA Japan France Germany / Netherlands /Austria
Tel.: +423/237 24 24 Tel.: +41 44/736 5010 Tel.: +44 1983/811 441 Tel.: +1 732/901 9488 Tel.: +81 3/3663 4733 Tel.: +33 1/4131 6750 Tel.: +49 8131/28 08 90
Fax: +423/232 53 93 Fax: +41 44/736 5011 Fax: +44 1983/811 439 Fax: +1 732/901 9608 Fax: +81 3/3663 4796 Fax: +33 1/4131 0511 Fax: +49 8131/28 08-30
www.neutrik.com
Draft. Nr.: BDA 178
Update:
/ 3102M1481
23.11.2007
Receptacle:
Wiring:
Panel cutout (rear side):
Strip the wires. Insert wires to terminals and tighten.
*
ATTENTION: Max torque 130 cNm
-2-
PowerCon HC
Data subject to change without prior notice. 2007 NEUTRIK . ALL RIGHTS RESERVED.©
®
R
N
E
U
T
I
K
R
R
CONNECTING THE WORLD
Assembled Connector
1. Push insert and chuck into housing.
2. Tighten bushing using open wrench 27 mm,
min. torque 3.5 Nm.
Important: Align the chuck and insert by
positioning the nose into keyway.
[0.394"]
10 mm
N
White
PE
Green
L
Black
DD
1.
2.
25.0
30.0
Ø 30.0
Ø
3.8
Note: Conductor colors according to color coding of North American cords.
1.
2.