Datasheet

Draft. Nr.: BDA 404 Update: 02.10.2014
I I
Data subject to change without prior notice. 2014 NEUTRIK . ALL RIGHTS RESERVED. NEUTRIK are registered trademark.
® ®
©
ASSEMBLY INSTRUCTION
www.neutrik.com
ASSEMBLY INSTRUCTION
nanoCON Cable Connector NSC3F & NSC3M
®
|
NEUTRIK AG LI T: +423 / 237 24 24 F: +423 / 232 53 93
NEUTRIK USA Inc. USA T: +1 704 / 972 3050 F: +1 704 / 438 9202
( )
NEUTRIK UK Ltd. UK T: +44 1983 / 811 441 F: +44 1983 / 811 439
NEUTRIK Vertriebs GmbH DE / NL / AT/DK T: +49 8131 / 280 890 F: +49 8131 / 280 830
NEUTRIK France FR T: +33 1 / 4131 6750 F: +33 1 / 4131 0511
NEUTRIK Tokyo Ltd. JP T: +81 3 / 3663 4733 F: +81 3 / 3663 4796
NEUTRIK Hong Kong Ltd. HK T: +852 / 2687 6055 F: +852 / 2687 6052
NEUTRIK India Pvt. Ltd. IND T: +91 / 982 05 43 424 F: +91 / 22 26163 540
R
R
Slide the boot onto the cable.
Push the contacts into the insert until you
hear a snap.
Put chuck onto the cable (1).
Slide insert and chuck together into the
housing.
Finish the installation by turning the bushing
onto the connector.
Prepare cable as shown.
Insert wires into the contacts and solder
them.
Attention: Pay attention to the guiding key (2).
Attention: Align the insert by positioning the
groove and the latch of housing.
A
B
C
E
F
D
A
B
C
D
E
F
G
11.0 [0.433”]
3.0 [0.118”]
NSC3F:
or
NSC3M:
NSC3F:
or
NSC3M:
G
23
G
2 3
G
1
2
Finish:
Cable O.D.
max. 3.4 mm
Contact Arrangement