Installation Guide

Rafter Assembly

Insert one 2x6x12 pressure treated wood into an inner rafter

section (75 3/8” long) followed by a rafter joiner.

Make sure the wood is flush against the the edge of the inner

rafter as shown.

12 x 16 Flat Top Pergola

Attach and fasten the nine rafter hangers as shown.

Align the top holes on the rafter hangers to those on top

of the main support beams and fasten with two, 1 1/2” screws

each.

Secure each rafter hanger in place using two 1 1/2” screws

through the pre-drilled holes as shown.

STEP FIVE

Insert an outer rafter section section (69 1/8“ long) as shown.

Screw the joiner to vinyl rafters and wood insert using 1 1/2”

screws.

Repeat STEP FIVE for the remaining 8 rafters.

STEP FOUR