Installation Guide

(Distance to
bottom of
wood beams.)
Front View
90°
B
Ledger Boards installation
Using a helper and two ladders proceed to complete the
following steps:
Mount the three 2x6 pressure treated wood boards (sold se-
parate) on your wall surface. Please consult your local hardware
store regarding methods of mounting. We recommend 11 lag
screws if mounting to a wood siding or concrete/brick anchor
if you are mounting to a brick wall. Screws heads should be
recessed flush with the wood beam.
1
STEP SEVEN
15
12 x 16 Flat Top Pergola
To locate the position of your wood beams;
A. Measure half way between the middle vinyl post
B. Mark and draw a string line square to the wall.
C. Measure up 94 3/8” and mark with pencil. This would
be the bottom centre of the middle wood board as shown.
58”, 66“, and 58”
2x6 x 16’ Pressure Treated Board cut in three pieces
94 3/8 in
58 in
(Wood Beam Length)
66 in
(Wood Beam Length)
58 in
(Wood Beam Length)
4 in (Distance Between Wood Beams)
C
94 3/8”
90°