Installation Guide

Fastening Decorative End Caps & Post Caps

12 x 16 Flat Top Pergola

Install decorative pergola end caps using vinyl weld.

Install the post caps using vinyl weld.

Final position your post trims.

To position post trim in place:

1. Slide the post trim down.

2. Apply a generous amount of vinyl glue around the post

3. Slide the post trim back up to the desired location and

allow a few minutes for glue to cure.

To glue decorative end caps place:

1. Apply a generous amount of vinyl glue to the decorative end caps as shown.

2. Slide the decorative end caps into the beam/rafter and allow a few minutes

for glue to cure.

STEP NINE