Assembly Instruction

Part ldentification Hardware

(1)×1

(2)×1

(3)×1

(4)×4

(5)×4

(2)

1：

2：

3：

Seat

Wood Base Leg

Hardware pack attached on the leg, includes : 4 bolts, 4 flat washers, and 1 Allen Wrench

Put the seat (1) upside down on the table. Put the wood base leg (2)

upside down onto the seat (1). Match base center panel on the wood

base leg with the swivel mechanism underneath the seat. Make sure

the holes are matched. Insert the bolt (5), flat washer (4) pass

through the wood panel and mechanism slot. Tighten bolts with

allen wrench (3).

(1)

Turn the stool over.

Assembly is

complete.

(4)

(5)

(3)

Flat Washers

φ8mm

Bolts

φM8X60mm

Allen Wrench

φ6mm x70mm

Howie KD Swivel

Counter Stool

1900161