Other Document
Programme selector
1.When the LED display screen brightens up, rotate the programme knob to select the
desired programme.
2.Select the【Delay】, 【Time】, 【Intensity】, 【Speed Dry】, or【Anti-Crease】
functions for additional options.
3.Press the【Start/Pause】button.
4.Press the【On/Off】button after the programme has comlpeted.
Programme start
Programme end
The drum will rotate after the programme starts. The remaining programme time will
be displayed.
Programmes
1.The drum will stop rotating after the programme ends. The display will show "0:00".
The dryer will start【Anti-Crease】function if the user doesn't remove the load.
(Refer to page 17).
Please press【On/Off】button after unloading the tumble dryer to cut off power
and pull out the plug.
2.Deal with the problems according to “Trouble Shooting” section, if there is an
unexpected stop during the drying procedure or the dryer shows an Error Code (Refer
to page 23).
Delay
This function is used for delaying the start of the drying programme up to 24 hours.
When the delayed programme starts, the time starts to countdown on the display and
the delay icon blinks.
1. Load your laundry and make sure the machine door is closed.
2. Press the 【On/Off】button,then turn the programme selector knob and select the
desired programme.
3. You can select the 【Anti-Crease】function according to your need.
4. Press the 【Delay】button.
5. Continue to press 【Delay】to select the desired delay time.
6. After the 【Start/Pause】 button is pushed, the dryer is at the run condition. The
drying procedure will be automatically performed when the delay time is over.
7. If you push the【Start/Pause】button again, the delay function will be paused.
8. If you want to cancel the “Delay” function, please press the 【On/Off】button.
Time
When the【 Warm】 or 【Cool】 or 【Refresh】 programme is selected, the 【Time】
button can be used to adjust the drying time in 10 min. steps.
Intensity
You can adjust the dryness level of the laundry by pressing the【Intensity】button.
1.The intensity function can be activated only before the programme start.
2. Except the Except 【cotton iron】, 【quick】, 【synthetic iron】, 【refresh】, 【cool】,
【warm】all the other programmes can be the【Intensity】function.