Installation Guide

6
www.newageproducts.com
Preparing for Installation
16in 16in 16in
24in24in 24in 24in
Level Line
24 - 30
inches
48.25
inches
Level Line
48
inches
24.25
inches
Determine your setup.
Locate Wall Studs and mark a vertical line
along the center of all studs in the
installation area.
Diagram below shows position relative to the
standard 16in stud spacing.
Diagram below shows position relative to the
standard 24in stud spacing.
Diagram below shows the position of two 4ft
slatwall’s next to each other.
Note: Connected ends between Slatwalls should
be installed into the same stud
B. For a 2x8ft slatwall conguration,
measure 24.25in down from the intended top of
slatwall and mark a level line.
Recommended guidelines shown below:
1
2
A. For a 4x4ft slatwall conguration, measure
48.25in down from the intended top of slatwall
and mark a level line.
Recommended guidelines shown below: