Installation Guide

8
www.newageproducts.com
Remove the lm on the adhesive from the
side cover.
Align one side cover to the top slatwall
panels while aligning the next cover to the
bottom panels.
The adhesive side will be applied to the
front of the slatwall panels.
Press rmly on the adhesive to secure
the cover strip in place
9
10
11
Add the plastic hole covers to the top
and bottom of the side covers. Repeat
steps 8 to 10 for the opposite end.
If you are installing multiple kits
together go to page 9 before installing
plastic hole covers.
8