Installation Guide

Method 1. Using double sided tape
provided. Attach double sided tape to
back of LED light bar. Peel backing o.
2
1
Installing LED Lights for Display Cabinets
3
Diagram 1.
A
B
1.5”
1.5”
3/8”Dia.
For bottom Display cabinet drill holes on back panel following Diagram 1. The
hole can be placed on either side of cabinet at point A. or B., depending on outlet
location. Using installation method from Steps 2 or 5 above center and install LED
light 3 - 4 inches in from front.