Instructions / Assembly

16
Installing Grill on custom built cabinet
WARNING
Cabinet frame, cabinet side
panels and counter top must be
made from non-combustible
material.
WARNING
DO NOT store or use products with
ammable liquids or vapors in the vicinity of
the NewAge Grill Cabinet,NewAge Outdoor
Kitchen cabinets or any appliances.
Note to Licensed Gas Fitter:
All built-in appliances must use rigid pipe, semi-rigid tubing, or a connector complying with the
standard for Connectors for Gas Appliances, ANSI Z21.24. CSA 6.10, or Standard for Connectors for
Outdoor Gas Appliances and Manufactured homes, ANSI Z21.75. CSA 6.27, for the appliance which
are connected to xed fuel piping system (Natural Gas).
The installation must conform with local codes or, in the absence of local codes, with the
National Fuel Gas Code, ANSI Z223.1/NFPA 54, Natural Gas and Propane Installation Code,
CSA B149.1. If you are connecting an appliance to a xed fuel piping system specifying the
use of a rigid pipe, semi-rigid tubing, and/ or a connector that complies with the standard for
Connectors for Outdoor Gas Appliances and Manufactured Homes, ANSI Z21.75 CSA 6.27.
WARNING
This grill is designed for non-combustible enclosures only, and must be installed and serviced by
a licensed gas tter to local codes.
As indicated on the rating plate, this gas grill is designed to operate with supply pressure of 7”
WC for Natural Gas. For installations where the gas supply pressure exceeds these requirements,
a regulator must be installed upstream of the grill’s components. If the gas supply pressure is
lower than these requirements, the unit will be under-red and will not reach the maximum
temperatures. Ensure that the supply line size complies with local and/ or national installation
codes.