Instructions / Assembly

44
Grill Maintenance and Cleaning
Flame Tamer Panels:
Stainless Steel:
When removing stubborn stains:
The Flame Tamer Panels normally burn o any accumulated food drippings. But you may
occasionally experience larger spills that don’t burn o under normal use.
When this happens:
1. Let the grill cool completely. Remove the racks and then the Flame Tamer Panels by lifting the
front edge and lifting them upward.
2. Flip the trays over and put them back in place over the burner.
3. Light the burners and set them to “MAX” for 5 - 10 minutes to burn the Flame Tamer Panels clean.
Be sure the Panels have completely cooled before reinstalling them. Any remaining food items
can be brushed o using a soft brush.
1. After each use wipe down the exterior of the grill to remove grease, black soot and splatters.
2. Be sure to follow the cleaning instructions for keeping the grates and burners clean and ready
for use.
3. Use a commercially available Stainless Steel cleaner to clean and polish the exterior surfaces.
Part of the appeal of the NewAge Grill is the ne grain nish. Always clean with the grain direction.
• Do not use metallic abrasives and always rub in the direction of the grain.
• Some household cleaning products are not suitable for stainless steel; be sure to read the label
before using on your NewAge Grill.
• Always use the mildest cleaning solution rst, scrubbing in the direction of the grain. Specks
of grease may gather in the grain of the stainless steel and bake on to the surface, giving the
appearance of rust.
To remove these baked-on foods use a ne to medium grit non-metallic abrasive pad (Scotch Brite
is good) in conjunction with a stainless steel cleaner. Always be sure to clean and polish with the
direction of the grain.
Replacement Flame Tamer Panels can be ordered from, shopNewAge.com