Instructions / Assembly

Grill Maintenance and Cleaning

SPECIAL NOTE FOR LOCATIONS NEAR POOLS AND COASTAL AREAS:

ACCESSING AND INSPECTING THE CONDITION OF THE SUPPLY HOSE

The 304 stainless steel material used in the construction of a NewAge Grill is highly rust resistant,

however, chlorine in the air from swimming pools or the salt from sea air may cause surface rust to

appear and even create some pitting if left on the product.

Here are a few tips to avoid this:

Regularly wipe down the exterior surfaces with a damp cloth. Micro ber cloths perform very well.

Allow the surfaces to dry before installing the cover. Do not cover a damp grill.

In extreme environments apply a rust inhibitor which leaves a microscopic protective layer on the

grill. Products that provide a layer of vapor corrosion inhibitors (VpCI™) protect the surface very

well.

For seasonal storage use the product referred to above, ensure the grill is dry and then cover and

secure the cover to minimize the amount of damp air getting to the surfaces.

THE NewAge WARRANTY DOES NOT COVER OCCASIONAL SURFACE RUST OR STAINING DUE TO

ENVIRONMENTAL CONDITIONS.

HOSE SHOULD HAVE A SMOOTH SNAKED PATH

TO PREVENT KINKS AND PREMATURE FAILURE.

PLEASE EXAMINE HOSE AND FITTINGS FOR

CRACKS, TEARS, OR WEAR MARKS FROM RUBBING

ETC.

Replacement supply hoses can be

ordered from ShopNewAge.com

STEP 1 OPEN DOOR

STEP 2 INSPECT THE CONDITION OF THE HOSE