Instructions / Assembly

18
Installing the RH Side Table Assembly
Start with tting the Utensil Peg into the
RH Side table assembly as shown.
Using a Wrench, tighten the Nuts on
the Utensil Pegs thread prole from
underneath.
Pre-tighten the Phillips Head Screw into
the RH Side Panel, allow enough clearance
to mount the RH Side table.
1
2 3
Parts required.
4x M6
Flanged Nut
1x RH Side table
assembly
4x Utensil Pegs
7x Phillips Head
Screw- M6X15L
Bottom view
Front view