Instructions / Assembly

8
Installing the Casters
Begin by placing the Base Panel Assembly
on a covered at surface (i.e, Cardboard).
Rotate the Base Panel Cover Frame
Assembly.
Using a screw driver, tighten the Plain
Washer, Split Washer & Phillips Head Screw
as shown.
Repeat and install the Casters onto all
the given pre-installed plates on the Base
frame Support.
NOTE: Casters (with Lock) should be
installed on front plates located near to
Wing Head Thumb Screw.
1
2 3
Parts required.
1x Base Panel Assembly
2x Casters
(With Lock)
2x Casters
(Without Lock)
16x Phillips Head
Screw - M6x15L
Casters (with Lock)
Casters (without Lock)
16x Split Washer M6
16x Plain Washer M6