Instructions / Assembly

Reaching the Maximum Temperature
Setting Low Temperatures
1. Start the charcoal, fully open the lid and the bottom vent.
2. Wait for 20 mins.
3. Close the lid and move the top vent to position 5.
4. Wait for few minutes and check the temperature.
5. Change the positions of top and bottom vents to increase or decrease the temperature.
1. Start the charcoal, close the lid and fully open the top and bottom vents.
2. Wait till the temperature gets within 20 degrees of your desired temperature.
3. Close the bottom vent to position 1 and set the top vent to position 1.
4. Wait for few minutes and check the temperature.
5. Change the top vent positions to stabilize and achieve the desired temperature.
Note: It is easier to increase the
temperature than decreasing it.
If the temperature is too high close the top vent to reduce the temperature, however if the
temperature is below th desired temperature try changing the position of top vent.
Controlling the Temperature
Positions of bottom vent
Right Slide adjustment
% of Air
Intake
1 2 3 4
5
0%
1 2 3 4
5
6%
1 2 3 4
5
12%
1 2 3 4
5
18%
1 2 3 4
5
24%
1 2 3 4
5
30%
Left Slide Adjustment
% of Air
Intake
1 2 3 4
5
20%
1 2 3 4
5
40%
1 2 3 4
5
60%
1 2 3 4
5
80%
1 2 3 4
5
100%
Open
Close