User Manual
7
newair.com
ASSEMBLY & INSTALLATION
BEFORE USING YOUR WINE FRIDGE
• This wine fridge is designed for freestanding installation. Do not build-in or
recess into closed cabinetry.
• Place your wine fridge on a flat, solid floor that is strong enough to support it
when it is fully loaded.
• To level your wine fridge, adjust the front leveling leg at the bottom of the
wine fridge.
• When moving your wine fridge, please do not incline it more than 45 degrees.
• Locate the wine fridge away from direct sunlight and sources of heat (stove,
heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat
sources may increase electrical consumption.
• Extreme cold ambient temperatures may also cause the unit to perform
improperly.
• Avoid locating the unit in damp areas.
• Plug the wine fridge into a dedicated (for this wine fridge only), properly
installed and grounded wall outlet.
• Do not under any circumstances cut or remove the third (grounding) prong
from the power cord.
• Any questions concerning power and/or electrical grounding should be
directed to a certified electrician or authorized product service center.