User's Manual

19
Safety
This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention
must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines
of this and of the computer manufacture must therefore be allowed at all times to ensure the safe use of the equipment.
EU Countries Intended for Use
The ETSI version of this device is intended for home and office use in Austria, Belgium, Denmark, Finland, France, Germany,
Greece, Ireland, Italy, Luxembourg, the Netherlands, Portugal, Spain, Sweden, and the United Kingdom.
The ETSI version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and Swit-
zerland.
EU Countries prohibited for use
None.
EU Countries where usage of the product as described below is limited to:
France: The use of other channels than 10 through 13 is prohibited by law.
Health And Safety Precautions
• Read this User’s Guide carefully, and follow the correct procedure when setting up the device.
• Do not open your wireless product or attempt to disassemble or modify it. Never insert any metallic object into the
device to avoid any risk of electrical shock, fire, short-circuiting or dangerous emissions. Your wireless product con-
tains no user-serviceable parts. If it appears to be malfunctioning, have it inspected by a qualified Newer Technology
Technical Support representative.
• Never expose your device to rain, or use it near water, or in damp or wet conditions. Never place objects containing liq-
uids on the device, as they may spill into its openings. Doing so increases the risk of electrical shock, short-circuiting,
fire or personal injury.
General Use Precautions:
• Do not expose the wireless product to temperatures outside the range of 5° C to 40° C (41° F to 104° F). Doing so may
damage the device or disfigure its casing. Avoid placing your wireless product near a source of heat or exposing it
to sunlight (even through a window). Inversely, placing your wireless product in an environment that is too cold or
humid may damage the unit.
• Always unplug the wireless product from the electrical outlet if there is a risk of lightning or if it will be unused for an
extended period of time. Otherwise, there is an increased risk of electrical shock, short-circuiting or fire.
• Use only the power supply shipped with the device.
• Do not use the wireless product near other electrical appliances such as televisions, radios or speakers. Doing so may
cause interference which will adversely affect the operation of the other products.
• Do not place the wireless product near sources of magnetic interference, such as computer displays, televisions or
speakers. Magnetic interference can affect the operation and stability of your wireless product.
• Do not place heavy objects on top of the wireless product or use excessive force on it.
• Never use excessive force on your wireless product. If you detect a problem, consult the Troubleshooting section in
this manual.
• Protect your wireless product from excessive exposure to dust during use or storage. Dust can build up inside the
device, increasing the risk of damage or malfunction.
• Newer Technology recommends the use of normal glass cleaning products to keep the high lustre finish at it’s finest
with this product. Be sure to not get any moisture inside the holes and if you do, allow time to air dry before use.
• Do not block the ventilation outlets on the rear of the wireless product. These help to keep your device cool during
operation. Blocking the ventilation outlets may cause damage to your device and cause an increased risk of short-
circuiting or fire.