User's Manual

6. Click “OK” and go to the “Proﬁles” tab. Highlight the net-

work you just added and click “Activate” to use that proﬁle.

You will notice the connection go from red to green when

you are connected. Your wireless connection is now set up

and ready to be used.

2. Once the Wireless Utility window is active, click on the “Site

Survey” tab. You should see your wireless network listed here.

If you don’t, click “Rescan”. If your network still doesn’t appear,

consult your wireless router’s manual or technical support.

3. Click on the wireless network you want to connect so it is

highlighted and click “Add Proﬁle”.

4. In the “System Conﬁgura-

tion” tab, you can name the

proﬁle and adjust any set-

tings needed to connect to

the network.

As settings for

wireless routers

can vary, you will

want to check your

particular router’s manual

or technical support for

information regarding

security settings and

wireless conﬁguration.

5. Click on “Authentication &

Security” to enter any se-

curity information needed

to connect to your wireless

network.