Users Manual

7
Volume button : Press volume button for 3 seconds to switch silence (3 steps)
Power Status LED : Illuminates green continuously after
power is applied to the system
Range Indications : Illuminates to give operator a distance
zone to the closest detected object.
LED’s operate from the left to right,
with a closer object resulting in more LED’s illuminated.
● Display units Technical Specification
Dim Button : Press Dim button to adjust LED (2 steps)
Press Dim button to verify the current mode for 3 seconds.
(LED 1 is less bright and LED 3 is the most bright)
(1)
When led # 1,#3 and #5 turn on, the system has malfunction. Please contact factory.
When led #2 and #5 turn on, communication has error.
Before testing the system, make sure the sensors have a clear field of view.
This is the most important when testing indoors because the system may detect walls, posts, etc.
Verify the green LED on the display is illuminated and the system indicates.
No objects are detected. (Indicator LEDs are off).
Detection Zone 3 Zones
Speaker 3 x different volume level to be selected
Operating Temp. -30°C ~ +70°C
Cable Length 0.7 Meter
Connector 4P Screw Lock type
Housing Material Polycarbonate
Dimension 20(H) x 65(L) x 54(D) mm
Weight 220g with Bracket