SDS
!
!
© 2015 NewLook International, Inc. www.getnewlook.com 1525 S. Gladiola Street Suite 8, Salt Lake City, UT 84104
Office 1.801.886.9495 Fax 1.801.886.9497
3!
Section 8
Exposure Control/ Personal Protection:
Exposure Limits:
Chemical Name
ACGIH TLV
OSHA PEL
Iron Oxide Red
Not Established
Not Established
Information on System Design: Maintain air levels below the recommended exposure limit using exhaust ventilation, if necessary.
Appropriate Engineering Controls:
Engineering Controls:
Eyewash Stations
Showers
Eye Protection: Wear safety goggles.
Skin Protection: Wear chemically resistant gloves and aprons to minimize contact with the skin.
Respiratory Protection: Use only with adequate ventilation. Avoid conditions, which result in formation of inhalable particles, such
as spraying or sanding painted surfaces. Is such conditions cannot be avoided, use respiratory protection only use NIOSH/MSHA
approved respirators in accordance with OSHA standard 29 CFR1910.134.
General Hygiene Considerations: Wash hands thoroughly after handling, especially before eating or smoking.
Section 9
Physical & Chemical Properties:
Physical State: Dry Powder
Color: Red
Odor: None
Odor Threshold: N/A
pH Value: 4 – 8 in 50 gr/l H
2
0 aqueous suspensions; DIN 787/9
Melting Point: Greater than 1832°F (1000°C)
Freezing Point: N/A
Initial Boiling Point: N/A
Flash Point: Will not Flash
Evaporation Rate: N/A
Flammability (solid, gas): Not Flammable
Explosion Limits: Lower Limits: N/A Upper Limits: N/A
Vapor Pressure: N/A
Vapor Density: N/A
Solubility: Insoluble
Auto Ignition Temperature: N/A
VOC: 0 g/l
Specific Gravity (kg/m
3
): 4.5 – 5.0 @ 68°F (20°C); DIN 787/10
Bulk Density: 600 – 1000 @ 68°F (20°C)
Particle Size: 0.3 – 0.6
Chemical Formula: Fe
2
O
3
Section 10
Stability & Reactivity:
Stability: Stable
Hazardous Polymerization: Will not occur
Conditions to Avoid: Flames and Excessive Heat
Materials to Avoid: Oxidizing agents or strong alkalis.