Spec Sheet

t: 949.417.5207 l www.newportbrass.com
©2021 Brasstech, Inc.
215
NEWPORT BATH
Codes / Standards Compliance
Meets or exceeds the following at date of manufacture:
• ASME A112.18.1/CSA B125.1
• IAMPO/cUPC
• IPC
• Energy Policy Act of 1992
• EPA WaterSense
• California Energy Commission
• All applicable US Federal and State material regulations
Colors / Finishes
• 10B: Oil Rubbed Bronze
• 15: Polished Nickel
• 15S: Satin Nickel - PVD
• 26: Polished Chrome
• Other: Refer to the Newport Brass catalog for additional color/finish options.
Page 1 of 2 Spec_215_c_3.21
EN-4300w
Features
• Solid brass construction
• Traditional styling
• 74 brass spray jets
• Brass nozzles for aesthetic appeal
• 1/2” NPT inlet pivot ball fitting (3/4” NPT without pivot ball fitting)
• 9.10” (23.1 cm) showerhead diameter
• CEILING MOUNT ONLY
• 1.8 GPM (6.8 LPM) Max
Showerhead
The Showerhead shall be of solid brass construction. Showerhead shall have a brass nozzle spray jet design incorporating 74 individual
spray nozzles. Showerhead shall have a 1/2” NPT inlet fitting (3/4” NPT when removing pivot ball fitting) and 9.10” (23.1 cm) showerhead
diameter while operating at 1.8 gallons (6.8 liters) per minute maximum flow rate. Showerhead shall be Newport Brass Model
215/___.
15S
10B 26 Other15
Model Description Colors | Finishes
215 Showerhead
Specied Model
Product Specication
Add “Color / Finish” sufx to Model number, below.