Instruction Manual

page 1 of 2 spec_

NEWPORT BATH

283-1

Handshower

Features

• Solid brass construction

• Contemporary styling

• Single function spray

• Finished spray surface

• Incorporates twin back-check valves

• 1/2" NPSM inlet fitting

• 1-3/4" x 1-3/4" (4.4 cm x 4.4 cm) spray area

Codes / Standards Compliance

Meets or exceeds the following at date of manufacture:

• ASME A112.18.1/CSA B125.1

• IAPMO/cUPC

• IPC

• Energy Policy Act of 1992

• All applicable US Federal and State material regulations

Product Specication:

The Handshower shall be of solid brass construction. Handshower shall have a single function spray pattern incorporating a finished spray

surface. Handshower shall incorporate twin back-check valves within the handle. Handshower shall have a 1/2" NPSM inlet fitting and

1-3/4" x 1-3/4" (4.4 cm x 4.4 cm) spray area while operating at 2.0 gallons (7.6 liters) per minute maximum flow rate. Handshower shall

be Newport Brass Model 283-3/___.

Add "Color / Finish" sufx to Model number, below.

Colors / Finishes

15:

15S:

26:

10B:

Polished Nickel

Satin Nickel

Polished Chrome

Oil Rubbed Bronze

• Other: Refer to the Newport Brass catalog for

additional color/nish options.

t: 949.417.5207 | www.newportbrass.com

Specied Model

Model Description Colors / Finishes

283-1 Handshower

15 15S 26 10B Other

PAGE 1
NEWPORT BATH Handshower Features 283-1 • Solid brass construction • Contemporary styling • Single function spray • Finished spray surface • Incorporates twin back-check valves • 1/2" NPSM inlet fitting • 1-3/4" x 1-3/4" (4.4 cm x 4.4 cm) spray area Codes / Standards Compliance Meets or exceeds the following at date of manufacture: • ASME A112.18.1/CSA B125.
PAGE 2
83-1 Product Dimensions (units are in inches) Newport Bath Handshower 283-1 page 2 of 2 spec_ 283-1 t: 949.417.5207 | www.newportbrass.com ©2011 Brasstech, Inc.