Installation & Assembly

Decking Installation Guide / v20191125US 15
DIAGRAM 26
4
The nal installed clips should look like
Diagram 24.
Note: The locking clip is in the middle of
Diagram 24 to show the expansion and
contraction is happening in both directions.
For more information on how to install the
locking clips and their placement, check
page 8 of this installation guide.
DIAGRAM 22
DIAGRAM 23
DIAGRAM 24
DIAGRAM 25
1
First, slide the UL-1 and UL-2 clips into the
grooves of the boards at a 30-45 degree
anglen at their respective joists as shown in
Diagram 25.
2
Once the clip is in, press down and the clip
will be ready to install into the joists as shown
in Diagram 25 & 26.
Note: Using hidden fasteners that are not
manufactured by NewTechWood nor
recommended by NewTechWood are not
warranted. Use these fasteners at your
own risk.
Option 2:
UltraLock System
Locking Clip
T Clip
3
Next, screw the clips into the joists at a 45
degree angle as shown in Diagram 27.
3
Repeat steps 1-2 until the deck is complete.
DIAGRAM 27