Installation Guide

52
Sandstone Outside Corner dimensions are 5 ½" x 5 ½" x 48"
Configure Vertical Linear Inches.
Total Linear Inches _______ / 48" = _____ number of pieces of corners.
 Sandstone Outside Corners can be used with any rock profile, except Slatestone. The Panel
will fit behind the corner. Two (2) corners per box.
Sandstone Flush Outside Corner dimensions are 3½" x 3½" x 48"
Configure Vertical Linear Inches.
Total Linear Inches _______ / 48" = _____ number of pieces of corners.
 Sandstone Flush Outside Corners can be used with any rock profile, except Slatestone, and
sit flush to panel ends. Outdoor applications may need caulk or weather seal. Two (2)
corners per box.

Slatestone Outside Corner dimensions are 12 ¾" x 4 ½" x 8 ¼"
Configure Vertical Linear Inches.
Total Linear Inches _______ / 8 ¼" = _____ number of pieces of corners.
 Slatestone Outside Corners sit flush with each panel. Four (4) corners per box,
2 Left/2Right.

Stacked Stone Outside Corner dimensions are 4" x 13¼" x 12"
Configure Vertical Linear Inches.
Total Linear Inches _______ / 13¼" = _____ number of pieces of corners.
 Slatestone Outside Corners sit flush with each panel. Four (4) corners per box,
2 Left/2Right.
TAKE-OFF SHEET
CORNERS cont.