Operation Manual

Niagara 9100 Series User Guide
ViewCast 143
5.
Select Create unique file to create a file that the system does not overwrite.
6.
Accept the default location that displays in the File Name field or choose your own location
for the file (Figure 150). To choose your own personal location select the link (horizontal
ellipses or … ) to the right of the File Name field and display the options.
Note: By default, the system sets this folder to D:\AVFiles\ with a default file name of
capture.mp4.
Figure 150. Select a Folder
WARNING! You can only save media files to drive D. Check drive properties for available
free space to determine your storage capacity.
A better practice would be to use the streaming server to save a file or to save it to a
remote drive. If you fill all available space, you risk losing your stream during a
streaming event.
7.
Select the Container Type (Table 4).
8.
Click the Enable Injection checkbox to inject an SDP file onto your server.
9.
Enter the username and password.
10.
Enter the Server SDP File Name.
11.
Enter the Server Port Number.
12.
Click Save Settings.