Operation Manual

Additional Settings and Features
176 ViewCast
Configuring IP address
Depending on your system configuration, you may need to configure the IP Address (Figure 189).
Figure 189. IP address
To configure IP address:
1.
Enable Use the following IP information.
2.
Enter the appropriate information in the IP Address, Subnet Mask, Default Gateway,
Preferred DNS Server and Alternate DNS Server fields.
3.
Click Submit.
Configuring advanced network settings
Advanced Settings (Figure 190) provides the network name, MAC Address, and server IP address
settings.
Figure 190. Advanced Settings
The network name (FE11450001 in Figure 190) is a link. If you click this link, the system transfers you to
the Machine Properties window. From this window, you can change the name of the system.
The Active Network Link field uses one of two icons to indicate whether the network interface card
selected has a network connected.
The system detects the network link.
The system does not detect the network link.