Operation Manual

Additional Settings and Features
180 ViewCast
Configuring email/SMTP settings
Figure 194. Email/SMTP Setting fields
To configure email settings:
1.
Enter the email address you want the system to send the email. Separate multiple email
addresses with a comma.
2.
Enter a valid originating email address.
3.
Enter a subject line for your email alert.
To configure SMTP (mail settings):
1.
Enter the SMTP user name for server access.
Note: If you are unfamiliar with setting up an SMTP Email account for sending
email, contact your network administrator for assistance.
2.
Enter the password if required.
Note: For security purposes, the password for your account does not display once
the system enters it into the system’s settings. Although this field appears blank
after you click Submit, the system retains the password information.
If you change any information in this dialog box, you need to re-enter your
SMTP password before clicking Submit. Not doing so overwrites the previously
entered password with a blank entry.
3.
Enter the name of the SMTP server.
4.
Click the Save and Send Test Email to test your settings. The resulting window reports
the email as successful or it sends information that a send failure occurred.
5.
Click Submit.