Operation Manual

Overview
14 ViewCast
Niagara 9100 series back panel
Figure 3 illustrates all connectors and other components of the Niagara 9100 series back panel. The
connectors vary depending on the Osprey capture card installed. Figure 3 depicts the Niagara 9100-2D
model.
Figure 3. Niagara 9100 series back panel
A.
Provides system power.
B.
Use this port to connect a PS/2 mouse.
C.
Use this port to connect a PS/2 keyboard.
D.
Use these ports to connect USB control devices, such as a USB memory device, keyboard,
and mouse.
E.
Use this port for an IPMI LAN connection.
F.
A COM1 RS232
G.
Use this auxiliary VGA output port to connect an external VGA monitor so you can view the
operating system interface.
H.
Dual Ethernet ports provide redundant connections to your network.
I.
Press this unit identifier (UID) button to illuminate the LED on both the front and rear of
the machine. The LED remains lit until you push the button a second time.
J.
Connect the video and audio.
Depending on the Niagara 9100 series model, the back may have additional components. For example,
Figure 4 depicts the Niagara 9100-4IPR with redundant power supply and IP connectors.
Figure 4. Niagara 9100-4IPR