Operation Manual

Niagara 9100 Series User Guide
ViewCast 15
Connecting the system
The following steps refer to a direct connection to the Niagara 9100 series systems only.
Note: The redundant models include hot swappable power supply modules.
To connect the system:
1.
Connect the appropriate video and audio connectors (item J on Figure 3).
2.
Connect the power AC adaptor (item A on Figure 3). For redundant models, two AC power
connectors are available (Figure 4).
3.
Attach the system to the network input (item H on Figure 3).
4.
Press Power (item P on Figure 2).