Operation Manual

Analog Inputs

54 ViewCast

Output tab

Use the following table to configure the output analog input settings for an Adaptive Adobe Flash

dynamic streaming encoder.

Note: The choices in the drop-down lists may vary.

Figure 46. Output tab

To configure output settings:

Select Stream to Flash Media Server.

CAUTION! Simultaneously publishing to server and file system increases CPU usage.

Enter the destination FMS Address.

Note: The Stream Path that displays is a combination of the FMS (Flash media Server)

address and the stream name.

Enter the Stream Name.

Note: The system accepts the %v parameter for video bitrate, %i for indexing, and %b for

overall bitrate, which is compatible with Adobe Flash media encoder.

Select Stream to File System to enable archiving content to the file system.

Accept the default location that displays in the Folder field or choose your own location for

the file. To choose your own personal location, select the link (horizontal ellipses or … ) to

the right of the Folder field and display the options (Figure 47).

Note: By default, the system sets this folder to D:\AVFiles. See Connecting an external

storage device for instructions on saving video files to a USB storage device.

Figure 47. Select a folder