Operation Manual

Niagara 9100 Series User Guide
ViewCast 61
Audio tab
Use the following table to configure the audio analog input settings for an Adaptive Microsoft Smooth
Streaming encoder.
Note: The choices in the drop-down lists may vary.
Figure 55. Audio tab
To configure audio settings:
1.
In the Source field, select an audio source from the drop-down list.
IMPORTANT! The audio input must match the connectors on the back of the system and
your audio source.
2.
Select the Overlay Closed Caption check box to enable overlay closed captions. Field 1 CC 1
is the default setting.
3.
Drag the sliders to adjust the Left Volume and Right Volume.
4.
(Optional) Select Mute Audio to silence the audio.
5.
Click Save Settings.