Operation Manual

Analog Inputs
84 ViewCast
quality degradation and encode session failure.
4.
Select Save to File to save the encoded content to a file. Each time you start this encoder,
the system overwrites the previous file.
5.
Select Create unique file to create a file that the system does not overwrite.
6.
Accept the default location that displays in the File Name field or choose your own location
for the file (Figure 82). To choose your own personal location select the link (horizontal
ellipses or … ) to the right of the File Name field and display the options.
Note: By default, the system sets this folder to D:\AVFiles with a default file name of
capture.mp4.
Figure 82. Select a folder
WARNING! You can only media files to drive D. Check drive properties for available free
space to determine your storage capacity.
A better practice would be to use the streaming server to save a file or to save it to a
remote drive. If you fill all available space, you risk losing your stream during a
streaming event.
7.
Click the Container Type.
8.
Select Enable Injection to inject an SDP file onto your server.
9.
Enter the username and password.
10.
Enter the Server SDP File Name.
11.
Enter the Server Port Number.
12.
Click Save Settings.