Operation Manual

Niagara 9100 Series User Guide
ViewCast 85
H.264 Presets tab
Each preset contains properties that you can modify. Use the following table to configure the H.264
presets analog input settings for an MPEG4 encoder.
Note: The choices in the drop-down list may vary.
Figure 83. H.264 Presets tab
To configure H.264 presets:
1.
Click Edit next to the property you want to modify.
IMPORTANT! These advanced presets affect the way the encoder performs and if set
incorrectly may lead to abnormal encoder operations. Refer to the H.264 Presets section for
suggested values for the type of video you are streaming.
2.
Change the Value.
3.
Click Update.
4.
Click the Restore Defaults link at the bottom of the window to return the settings to the
default.
Note: The database has multiple properties for each preset. Clicking Restore Defaults for one
property will change all properties to the default settings.