Operation Manual

100
 Config Load Button: If you click on this button, the corresponding configuration is
loaded in the B264 device. It will replace the currently-running configuration.
Dashboard™ will take a few seconds to reload (longer if you are accessing over a wide-
area network), but the actual configuration in the B264 is virtually instantaneous. The
Status Message Area will indicate the result of the operation.
 Config Delete Button: If you click on this button, the corresponding configuration and
its description are deleted.
 Config Save Button: If you click on this button, the current card configuration is saved
on the corresponding slot, possibly replacing the configuration saved there if it is not
empty.
 Download Config: If you click on the Save button, the corresponding file is downloaded
to your computer. This feature is provided to allow configuration backups.
If you save a configuration to your computer, and later wish to restore it to the B264, use the
following procedure:
1. If you are working with the modular version of the encoder you can skip to step 5.
Otherwise, continue to step 2.
2. On Dashboard, open the user interface for the frame controller (slot 0).
3. Select the Data Safe tab in the configuration area.
4. Uncheck the Disable checkbox corresponding to the card you wish to restore the
configuration. This step is depicted below.
5. On the Dashboard™ Tree View, right-click on the card, and select Restore
Configuration. Follow the prompts and navigate to the file you wish to restore. You
can also use this process to copy the configuration from one running encoder to another,
even if the encoders are on different frames or are of different types (e.g., it is possible to