Operation Manual

115
Internet
Explorer
Support
Firefox
Safari
Chrome
Support
Web Pages Served by the B264
The B264 automatically generates web pages that will display the video being encoded,
depending on the output mode of the encoder channels (please refer to the Encoder Connections
Tab section). The pages will be available for the following output protocols:
 ASI/IP Streaming, as long as IP Outputs with multicast destination IP addresses have
been defined.
 Direct HTTP Streaming.
 HTTP Live Streaming, when configured to use the local server.
The web pages generated by the B264 assume that the VideoLAN plugin has been installed to
provide playback services.
For the B264, Direct HTTP Streaming and HTTP Live Streaming pages are also available from
the control port.
To get started, simply point a web browser to the IP address of the desired B264 Ethernet port:
http://encoder_ip
The B264 will respond with a Web page with the appropriate links to access the streams,
depending on the current configuration. Note that the pages served by each Ethernet port may be
different; for example, if the encoders are set to ASI/IP streaming, and no IP Outputs are defined
for a given Ethernet port, the web page served from it will indicate that there are no streams
available.
The next page shows a few examples of how these web pages look like, depending on the
encoder settings.