Operation Manual

85
The Basic view includes the following:
 Enabled: The configured value of this parameter.
 TS Bit Rate (b/s): This column provides the current bit rate of the output transport
stream. This does not include UDP and IP overhead, nor RTP/FEC overhead.
 UDP Port: The configured value of this parameter.
 Destination Address: The configured value of this parameter.
 RTP: The configured value of this parameter
 FEC: Summary of the FEC configuration. If FEC is disabled, this field will indicate it as
Off. If FEC is enabled, this field will indicate the FEC matrix size as Columns × Rows,
and the protection mode as C for Column Only or R-C for Row and Column. In the
example above, Stream 1/1 has Column Only FEC with 1 Column and 4 Rows, and
Stream 2/1 has Row and Column FEC with 4 Columns and 10 Rows.
 Stream Name: The configured stream name.
 Edit Stream: If you click on this button, you can modify all the parameters for this
output. The configuration area will re-open with the current output settings.
 Delete Stream: If you click on this button, the stream is deleted and removed from the
table.
When the Advanced view is selected, additional fields appear in the table, as depicted below:
The Advanced view includes all items in the Basic view plus the following: