Operation Manual

Digital Inputs
124 ViewCast
Audio tab
Use the following table to configure the audio digital input settings for an Adaptive Adobe Flash
encoder.
Note: The choices in the drop-down list may vary.
Figure 151. Audio tab
To configure audio settings:
1.
In the Source field, select an audio source from the drop-down list.
IMPORTANT! The audio input must match the connectors on the back of the system and your
audio source.
2.
Select the Overlay Closed Caption check box to enable overlay closed captions. Field 1 CC 1
is the default setting.
3.
Enter the audio output Format.
4.
Enter the Audio Type.
5.
Select the Bitrate from the drop-down list.
6.
Drag the slider to adjust the Left Volume and Right Volume.
7.
Select the Audio Encoder from the drop-down list.
8.
Drag the slider to adjust the Left Volume and Right Volume.
9.
(Optional) Select Mute Audio to silence the audio.
10.
Click Save Settings.