Operation Manual

Digital Inputs
146 ViewCast
Audio tab
Use the following table to configure the audio digital input settings for an AVI encoder.
Note: The choices in the drop-down list may vary.
Figure 179. Audio tab
To configure audio settings:
1.
In the Source field, select an audio source from the drop-down list.
IMPORTANT! The audio input must match the connectors on the back of the system and your
audio source.
2.
Select the Overlay Closed Caption check box to enable overlay closed captions. Field 1 CC 1 is
the default setting.
3.
Click the Audio Format from the drop-down list.
4.
Drag the sliders to adjust the Left Volume and Right Volume.
5.
(Optional) Select Mute Audio to silence audio.
6.
Click Save Settings.