Operation Manual

Digital Inputs
160 ViewCast
MPEG-2 Presets tab
Each preset contains properties that you can modify. Use the following table to configure the MPEG-2
presets analog input settings for an MPEG2 encoder.
Note: The choices in the drop-down list may vary.
Figure 192. MPEG-2 Presets tab
To configure MPEG-2 presets:
1.
Click Edit next to the property you want to modify.
IMPORTANT! These advanced settings affect the way the encoder performs and if set
incorrectly may lead to abnormal encoder operations. Refer to Appendix B: H.264
Advanced Settings for suggested values for the type of video you are streaming.
2.
Change the Value.
3.
Click Update.
4.
Click the Restore Defaults link at the bottom of the window to return the settings to the
default.
Note: Each preset has multiple properties. Clicking Restore Defaults for one property
will change all properties to the default settings.